Caps & Adapters
UFS Threaded Caps
1500 – 1 ½”, 2000 – 2″, 2500 – 2 ½”, 3000 – 3″
Designed to cut the cost of petty theft, while at the same time providing maximum protection. The U.F.S. Cap is available in sizes to fit 1 12″, 2″, 2 1½”, 3″ male threads. It comes complete with sturdy plated attaching chain and inside gasket. The U.F.S. cap is ideal for protection of interior fire valves where theft of expensive brass parts is most prevalent.
Available Threads:
1″- NHT (NST), NPSH (SIPT), NYFD,
2″- NPSH (SIPT),
2 ½”- NHT (NST), NY(FD), NY Corp., Chicago FD, CSA (5 x 3 ⅛”), B.C., & AMA (8 x 3) WCT., (6 x 3 ¼), QST (7 x 3 ¹⁄₃₂),
3″- NHT (NST)
1″- NHT (NST), NPSH (SIPT), NYFD,
2″- NPSH (SIPT),
2 ½”- NHT (NST), NY(FD), NY Corp., Chicago FD, CSA (5 x 3 ⅛”), B.C., & AMA (8 x 3) WCT., (6 x 3 ¼), QST (7 x 3 ¹⁄₃₂),
3″- NHT (NST)
2500U
2 ½” Universal Valve Cap
No more thread problems! The U.F.S universal pull cap
protects all 2 /2″ male threads by gripping the inside
of the waterway. It comes complete with sturdy plated
attaching chain. Push on – Pull off.
2502 Break Cap
This special moulded break cap is designed for quick release when every second counts. It is engineered to protect 2 1/2″ swivel inlets on siamese, standpipe and sprinkler connections. It is locked in place by open eyebolts, which attach to pin lugs on swivel connections only. A sharp
blow will fracture the cap and clear the connection for action. Supplied in standard red.
2501 Adjust-A-Plug
Here’s an inexpensive protective plug for swivel connections up to 2 1/2″ in diameter. It features two adjustable metal plates installed in the back of the plug, that can be easily mated with your local thread. Once adjusted to size, the metal plates are locked in place by a central metal bolt. The plug can be easily removed with a fire department spanner wrench. The plug can be reinstalled in place by fire department personnel after shutdown. Supplied in standard red.
2515
Reducing Adapter (2 ½” Fem x 1 ½” Male)
Molded from the same tough material as U.F.S. polycarbonate nozzles. Strong, durable, and with no scrap value, stays on the job.
Sizes Available:
2 ½” female Inlet: NHT (NST), NYFD, NY Corp., Chicago (FD), Det. (FD), B.C. (8 x 3), CSA (5 x 3 ⅛”)
1 ½” male outlet: NHT, NPSH (SIPT), NY (FD)
2 ½” female Inlet: NHT (NST), NYFD, NY Corp., Chicago (FD), Det. (FD), B.C. (8 x 3), CSA (5 x 3 ⅛”)
1 ½” male outlet: NHT, NPSH (SIPT), NY (FD)
2520A
2 ½” Fem. X 1 ½” Male Polycarbonate Adapter
Sizes Available:
2 ½” female threads: NHT (NST), NY Corp., NY(FD) Chicago(FD), CSA (5 X3 ⅛”), B.C. and A.M.A. (8X3), Nova Scotia Std (5 X 3 ¼”)
1 ½” male threads: NHT and NPSH (SIPT), Height – 4 ⅜”
2 ½” female threads: NHT (NST), NY Corp., NY(FD) Chicago(FD), CSA (5 X3 ⅛”), B.C. and A.M.A. (8X3), Nova Scotia Std (5 X 3 ¼”)
1 ½” male threads: NHT and NPSH (SIPT), Height – 4 ⅜”
1515
1 ½” Female to male adapter. Molded from the same
tough material as UFS polycarbonate nozzles.
Available Threads:
1 ½” Female NPSH (SIPT)
1 ½” Male NHT (NST)
1 ½” Female NPSH (SIPT)
1 ½” Male NHT (NST)